ClareControls CH-THSTAT-W Betriebsanweisung PDF herunterladen (Seite 73)

Clare Controls IP Network Camera User Guide 65

Choose the day to set the record schedule.

Set all-day record or segment record:

1. If you want to configure the all-day recording, select the All Day checkbox. If you

want to record in different time sections, select the Customize checkbox. Set the

Start Time and End Time.

Note: The time of each segment cannot be overlapped. You can configure up to four

segments.

2. Select a Record Type. The record type can be Continuous, Motion Detection Alarm,

Motion l Alarm, Motion & Alarm, PIR Alarm, Wireless Alarm, Emergency Alarm, or

Manual Alarm.

Continuous: If you select Continuous, the video will be recorded automatically

according to the time of the schedule.

Record Triggered by Motion Detection: If you select Motion Detection, the video

will be recorded when the motion is detected. Configure the recording schedule, the

motion detection area, and select the checkbox of Trigger Channel in the Linkage

Method of the Motion Detection Settings interface.

Record Triggered by Alarm: If you select Alarm, the video will be recorded when

the alarm is triggered via the external alarm input channels. Configure the recording

schedule, set the alarm type, and select the checkbox Trigger Channel in the

Linkage Method of the Alarm Input Settings interface.

Record Triggered by Motion l Alarm: If you select Motion or Alarm, the video will

be recorded when the external alarm is triggered or the motion is detected.

Configure the recording schedule and the settings on the Motion Detection and

Alarm Input Settings interfaces.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 91 92

Keine Kommentare

ClareControls CH-THSTAT-W Betriebsanweisung Seite 73